Vagas Celulose is an independent job search aggregator. We may earn a commission when you click through.
Manufacturing Jobs in Toronto: Skills, Pay and Fit
Ten Toronto-area manufacturing roles range from precision tooling to cost accounting, but the listings do not publish salary for most jobs.
Manufacturing jobs in Toronto are not all the same. A toolmaker spends the day on precision machining. A production expeditor chases parts and deadlines. A cost accountant may never step onto the shop floor. The listings below show that the real question is not simply “which job is open?” It is “which kind of manufacturing work matches your experience, tolerance for pressure, and long-term plan?”
One detail matters right away: only one listing gives a salary, at CA$80,000 to CA$95,000 a year. The other roles do not publish pay, benefits, shift details, or contract type in the supplied listing data. Confirm those points before applying. The links lead through Talent.com job listings, so read the current posting carefully before sending your CV.
What to Check Before You Apply
Most people get distracted by the job title. That is where trouble starts. “Specialist,” “lead,” and “expert” usually signal more responsibility than an entry-level production role, even when the listing does not spell out the requirements.
- Pay: ask for the hourly rate or annual salary before accepting an interview.
- Contract: confirm whether the role is permanent, temporary, contract, or probationary.
- Schedule: ask about shifts, overtime, weekends, travel, and on-call work.
- Tools and credentials: check whether machining, PLC, accounting, or mining experience is required.
- Location: several listings point to Toronto or the GTA, but the actual plant location may be elsewhere.
For Canadian wage and occupation information, compare the posting with the federal Job Bank job search. It will not replace the employer’s offer, but it gives you a useful reality check on duties and local pay.
Common Mistakes That Cost Candidates Time
Applying to every factory job with the same CV rarely works. A toolmaker CV should show machines, tolerances, materials, and inspection equipment. A production expeditor CV should show scheduling, purchasing, inventory, and communication. A cost accountant CV needs manufacturing costing, variance analysis, and financial systems.
Do not assume a senior-sounding title means high pay. The supplied data confirms the salary only for the Senior Cost Accountant role. For every other listing, treat compensation as unknown until the employer confirms it in writing.
Hands-On Precision Work
Four listings are built around technical production skills: dies, milling, lathes, interior trim planning, and process improvement. They are not interchangeable. The right pick depends on whether you want to build parts, plan finished components, or improve how a plant runs.
Tool & Die Maker
The Tool & Die Maker listing is the most specialised hands-on role in the group. Its title points to precision dies and on-site tooling, so expect close work with measurements, repairs, setup, and production interruptions. The listing does not state salary, benefits, shift, or contract type; ask for all four before moving forward. Best for an experienced toolmaker who can diagnose tooling problems without constant supervision and wants to stay close to the shop floor.
Toolmaker
Compared with the first toolmaking role, this GTA position names the machines more clearly: milling, lathes, and dies. That makes it easier to judge your fit before applying, especially if your background is stronger in conventional machining than broader tooling support. Pay and employment terms are not provided, so do not read “GTA” as a salary promise. Best for a machinist with direct milling and lathe experience who wants a clearly defined technical lane.
Bespoke Interior Trim Planner
The Bespoke Interior Trim Planner is less about cutting metal and more about planning custom vehicle-interior work. The BMW Group search context suggests an automotive setting, but the supplied data does not confirm duties, pay, benefits, or required experience. That uncertainty matters: planning roles can involve coordination and documentation rather than direct production. Best for someone with automotive manufacturing knowledge, strong organisation, and comfort translating custom requirements into a workable production plan.
Manufacturing Process Specialist
A Manufacturing Process Specialist sits one step away from daily machine operation and focuses on how production is done. The title suggests process analysis, troubleshooting, and improvement, but the listing supplies no salary, certification requirements, or schedule. Compared with the toolmaker roles, this path may suit someone who wants broader plant responsibility and less repetitive machining. Best for a manufacturing technician or engineer who can document problems, test changes, and work with operators without losing touch with production reality.
These four jobs demand more than general factory experience. A candidate who only has packing or assembly experience should not oversell their background. Start with measurable skills: machine types, inspection methods, drawings, materials, software, safety training, and years on the floor.
The first two roles are the clearest fit for machinists and toolmakers. The trim planner and process specialist move toward planning and improvement, which can mean more paperwork and coordination but also a broader career path.
Production Control and Operations Pressure
Production does not stop because one component is late. The next group is about keeping work moving, managing capability, controlling systems, and supervising output. These roles can pay well, but the stress is different from machining: deadlines, escalations, compliance, and decisions affect entire production lines.
Production Expeditor
The Production Expeditor is the practical middle ground between the shop floor and the supply chain. The title usually means tracking parts, following up on delays, and pushing orders through before production stalls, although the supplied listing does not confirm the exact duties or pay. Compared with a process specialist, this role is likely more deadline-driven and communication-heavy. Best for a manufacturing worker who understands production flow, stays organised under pressure, and can chase updates without creating confusion.
Emerson DeltaV DCS Engineer
The Emerson DeltaV DCS Engineer is a specialist automation role, not a general factory opening. DeltaV experience is the key signal in the title, so candidates without distributed-control-system work should not treat this as a quick transition from basic production. The listing does not state salary, travel, shift pattern, or certification requirements. Best for an experienced controls professional who can support industrial automation and wants technical work with direct impact on plant reliability.
Commercial Capability Lead Canada, Cross Franchises
The Commercial Capability Lead is the outlier in this section. It is connected to Mississauga and manufacturing-related commercial operations, but the title points to business capability and cross-franchise leadership rather than production-floor work. The supplied information gives no pay, benefits, or contract details. Best for a senior professional who has led commercial programmes across multiple business units, not for someone searching for a first factory role.
Surface Mining Production Manager
Surface Mining Production Manager carries the biggest operational responsibility in the list, but it may also require relocation or extensive travel outside Toronto. The title suggests responsibility for output, safety, crews, and equipment, yet none of those conditions or the salary are confirmed in the supplied data. Compared with the expeditor role, this is a management job with much higher accountability. Best for a proven mining supervisor or production manager who has led outdoor operations and accepts that the worksite may not be in the GTA.
Senior Cost Accountant
This is the only listing with published compensation: CA$80,000 to CA$95,000 a year. The Senior Cost Accountant role is not shop-floor work, but it is tightly tied to manufacturing through costing and financial control. The salary is useful because it gives the group one concrete benchmark; still, the posting does not confirm benefits, schedule, or contract type. Best for a senior accountant with manufacturing costing experience who wants predictable office-based work connected to plant performance.
The operations group shows why title alone can mislead. A production expeditor may be closer to daily factory activity than a commercial lead, while the cost accountant has the clearest pay information despite never operating a machine. Ask yourself where you want your working day to happen: beside equipment, in production control, at a computer, or managing an entire site.
For safety standards, training expectations, and workplace rights, use the Ontario government’s workplace health and safety guidance alongside the employer’s job description. A vague posting is not a reason to ignore safety questions.
The Craft Route: Tailoring and Custom Work
Only one listing falls into this narrower craft category. It is still production work, but the materials, pace, and skill test are different from metalworking or process engineering.
Tailor
The Tailor role is the smallest fit for a conventional factory search, but it belongs here if your production experience is in garments, alterations, or custom textile work. The listing supplies no wage, schedule, benefits, or contract information, so ask whether the work is made-to-measure, repair-based, or part of a larger production line. Best for a skilled tailor who values hands-on craft and can show finished work, accurate measurements, and consistent quality.
Quick Decision Guide
Choose Tool & Die Maker if you have precision tooling experience and want hands-on work with dies and equipment.
Choose Toolmaker - Milling, Lathes & Dies if your strongest evidence is specific machine experience in the GTA.
Choose Production Expeditor if you understand factory flow, can manage delays, and prefer coordination over machine operation.
Choose Manufacturing Process Specialist if you want to improve production methods and can combine technical knowledge with documentation.
Choose DeltaV Engineer only if industrial automation and DeltaV experience are already part of your background.
Choose Senior Cost Accountant if you want the clearest salary signal in this list: CA$80,000–CA$95,000 annually, with manufacturing costing as the core connection to the plant.
Choose Surface Mining Production Manager if you have management experience and are open to a worksite outside Toronto or the GTA.
Before applying, tailor the CV to the actual work. Put machines and tolerances near the top for tooling jobs, scheduling and inventory for expediting, and costing systems for accounting. Then confirm salary, benefits, contract type, location, and shift in writing. For a broader look at pay and job quality in factory work, continue with Factory Jobs That Pay Well in June: What to Consider.